 |
RF Code OPC Server for Zone Manager |
| Product Category: Server | Target User: End User |
The RF Code OPC Server for Zone Manager publishes all information from Zone Manager to the OPC Data
Access (DA) standard. By integrating Zone Manager with OPC, RF Code’s wire-free sensor tag
information and active RFID tag information can flow into various OPC Client based systems such as
SCADA applications, building management systems, and industrial controls systems.
The OPC Server for Zone Manager is a stand-alone integration application that installs on a Windows
based system. It can be installed on the same system as Zone Manager or on a remote / different
system. One OPC Server for Zone Manager is required for each Zone Manager system and is
accessible by one or more OPC client applications simultaneously. |
 The OPC Server for Zone Manager makes the following information from RF Code tags and readers available
to OPC Client applications: | | Asset Tag data - Location, online/offline status, battery status, motion status, tamper status | Sensor Tag data - Location, online/offline status, battery status, sensor information (temperature,
humidity, fluid detection, door status, dry contact) | | RF Code Reader data - Status, noise level, event rate, tag capacity utilized, firmware version | All of the above information is updated in real-time so consuming OPC applications are assured to have
up to the minute data from the RF Code solution. |
|
|
|
|
| Windows Server 2008 | | Windows Vista (64-bit) | | Windows Vista (32-bit) | | Windows 2003 Server | | Windows XP |
|
|
|
|
|
| Ethernet IP |
|
|
|
|